SRT-6100 Portable Digital Surface Roughness Measuring Instrument

Surface Roughness Measuring Instrument 1.filter:RC,PC-RC,GAUSS,D-P 2.parameter:Ra,Rz,Rq,Rt 3.inductance sensor 4.420g

SRT-6100 Portable Digital Surface Roughness Measuring Instrument

 

 

Application:

This Surface Roughness Measuring Instrument is compatible with four standards of site to measure surface roughness of various machinery-processed parts, calculate corresponding and clearly display all measurement parameters. When measuring the roughness of a surface, the sensor is placed on the surface and then uniformly slides along the surface by driving the mechanism by the sharp built-in probe. This roughness causes displacement of the probe which results in change of inductive amount of induction coils so as to generate analogue signal, which is in proportion to the surface roughness at output end of phase-sensitive rectifier.  The exclusive DSP processes and calculates and then outputs the measurement results on LCD.

Features

* Multiple parameter measurement: Ra, Rz, Rq, Rt

* Highly sophisticated inductance sensor

* Four wave filtering methods: RC, PC-RC, GAUSS and D-P

* Built-in lithium ion rechargeable battery and control circuit with high capacity

* Small in size, light in weight and easy to use

* Can communicate with PC computer for statistics, printing and analyzing by the optional cable and the software for RS232C interface.

*Manual or automatic shut down. The tester can be switched off by pressing the Power key at any time. On the other hand, the tester will power itself off about 5 minutes after the last key operation.

*The tester can memorize 7 groups of measurement results and measuring conditions for later use or download to PC.

*Metric /Imperial Conversion

Specification

Display: 4 digits, 10 mm LCD, with blue backlight

Parameters:  Ra, Rz, Rq, Rt

Measuring Range

           Ra, Rq:  0.005-16.00um/0.020-629.9uinch

           Rz,Rt:   0.020-160.0um/0.078-6299uinch

Accuracy: Not more than ±10%

Fluctuation of display value: Not more than 6%

Sensor: Test Principle: Inductance type

          Radius of Probe Pin: 5um

          Material of Probe Pin: Diamond

          Dynamo-measurement of Probe: 4mN (0.4gf)

          Probe Angle: 90º

          Vertical Radius of Guiding Head: 48mm

Maximum driving stroke:  17.5mm/0.7inch

Cutoff length (l): 0.25mm / 0.8mm / 2.5mm optional

Evaluation length:  55 cut-off

Driving speed:

         sampling length = 0.25mm   Vt=0.135mm/s

         sampling length = 0.8mm    Vt=0.5mm/s

         sampling length = 2.5mm    Vt=1mm/s

         returning                                Vt=1mm/s

Profile digital filter

         Filtered Profile:            RC

         Filtered Profile:            PC-RC

         Filtered Profile:            Gauss

         Non-Filtered Profile:        D-P

Resolution : .001μm    if reading less than10um

                      0.01μm    if 10μm≤reading less than 100μm

                      0.1μm    if reading ≥100μm     

Evaluation length : 5 cut-off

Power Li-ion battery: rechargeable

Operating conditions:  Temp. 0~50°C

                       Humidity <80%

Size:140x57x48 mm  (5.5x2.2x1.9 inch)    

Weight: about 420 g

SRT-6100 Portable Digital Surface Roughness Measuring Instrument